Popular products

ELPI+

ELPI+ from Dekati is a very robust and versatile instrument. Large measuring range (6 nm - 10 µm), real time (10 Hz), number of particles, size and mass distribution in 14 channels; in high-resolution version 100 or 500 channels. Approved according to several standards.

ECHO EMERGENCY HV

A viable solution in emergency or remote situations such as fires, high mountain, isolated areas, contaminated environments. PTS / PM10 / PM2,5 / PM1 sampling on a filter and (PUF) for gaseous organic, (PCDD/F, PCBs and PAH’s) with the. Possibility to monitor PM 10 – PM 2.5 – PM1 real time and 24 sizes classes

Andersen Impactor

Andersen Cascade Impactor 6 Stage Viable.A sampling device can be used as a substitute for the respiratory tract as a collector of viable airborne particles, and as such, it should reproduce to a reasonable degree the lung penetration by these particles.

EDM180

EDM180 is used as an approved instrument for air quality measurements in more than 30 countries. Is approved according to, among others, US-EPA, UK-MCERTS, CN-CMA. Real-time measurement of PM10, PM2.5, PM1, number of particles and size distribution. Also located in several of the Swedish public measuring stations.

ECHO PM

ECHO PM from TCR Tecora is an instrument for outdoor operation in with the reference methods EN 12341 for PM 10, US EPA 40 CFR and PM2.5

EZ-PEMS

EZ-PEMS is an innovative product from ECM. The instrument is developed for car inspection and screening tests of large vehicle fleets, but also works for traditional PEMS and for tests on heavy vehicles and ships. Also used to detect tampering with exhaust gas after-treatment systems

PPS-M

PPS-M from Pegasor. Both number of particles (PN) and mass (PM). Is a very useful tool in the development of exhaust gas purification. In addition to the automotive industry, PPS-M is used in stack measurements.

Dust Decoder 11-D

Despite its size, the Dust Decoder Model 11-D from Grimm is a very powerful instrument. Measures in real time TSP, PM10, PM4, PM2.5 PM1, PN and PMcoarse. In work environment, inhalable, thoracic and alveolar particles are measured. 11-D has 31 size channels and several possibilities for easy data transfer

DI-1000

Dekati diluter DI-1000 is one of the world's most widely used diluents for combustion gases. That it is robust, built in stainless steel, no moving parts, can handle 450 C are some of the explanations for its popularity

DLPI+

DLPI+ (Dekati® Low Pressure Impactor) is a 14-stage gravimetric impactor used to determine particle size distribution in 14 size fractions in the range 16 nm - 10 μm. In each size fraction, the particles collect on 25 mm substrate.

Mi3

A very popular product that is mainly used in the automotive industry is Mi3 from Pegasor. Both number and particle mass down to 10 nm in real time. Meets EU specification for PEMS measurements.

SAG 410

SAG 410 - Aerosol generator from Topas is a popular particle generator for solid aerosols (VDI 3491–8). Easy to use and very accurate. There are versions for different mass flows.

DIL 560

The dilution systems from the Topas DIL 500 series (available in more versions) are designed to precisely dilute aerosols and produce a defined particle concentration. The main application of the dilution systems is in filter testing and clean rooms.

MetOne 804

804 is a handheld particle counter from MetOne. Many areas of use, process control, filter tests, control of laboratories, hospital air, work environment controls. Measures the following size classes, 0.3; 0.5; 0.7; 1.0; 2.5; 5; and 10 µm

MiniWras

The Grimm Mini Wide Range Aerosol Spectrometer (MiniWRAS) is the only portable instrument on the market that enables simultaneous and accurate real-time monitoring of both "nano-" and "micro-size" particles in 41 size channels (10 nm - 35 µm).

DiscMini

DiSCmini from Testo is a handheld instrument that measures the number of particles and their median size with 1 Hz. DiSCmini is often used in work environment contexts.